PORSCHE 986 EXHAUST O RINGS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Our beautiful muffler gasket kits offer you everything you need for a perfect installation except a little labor! Don't fight rusted bolts or sae sized hardware. Specifically for the '75-76 2.0l.
Note: before ordering any 914 exhaust part, make sure you check the style of heat exchangers to determine the correct system for your car. Since all four cylinder exchangers/mufflers fit all 914s, you may not have the same muffler and components originally fitted to your car. It is advised to match an exhaust system and gasket kit to the style of heat exchangers and not the year of car or engine.
- 1970-73 1.7/1.8l models have heat exchangers that turn up before connecting to the muffler. The flange gaskets are...(choose a part on the right to read more)
General Fitment 914 1970-76
Our 17-piece clutch package contains everything we use in our shop minus the flywheel for a perfect clutch replacement. beware of lesser kits, you will need all of these parts! Included is the clutch installation manual.
Kit consists of:
1 - r90111608111 - sachs clutch release bearing - normally $185.59
2 - g90111682511 - clutch bearing guide - normally $16.42
1 - g111105311 - felt gasket washer 914 flywheel - normally $1.99
1 - g021105275 - washer - normally $15.25
1 - r029105245b - oe engine crankshaft seal rear main 914 - normally $14.00
1 - g113311113b - oil seal - normally $24.86
1 - g021105279 - o-ring - normally $4.61
1 - r111105313a - 914 flywheel needle bearing - nor...(choose a part on the right to read more)
General Fitment 914 1970-76
Eliminate your clutches slipping and chattering with this genuine kit. We only recommend this kit for non-modified cars that are not running any aftermarket upgrades like exhaust, chip tuning, larger displacements or larger turbochargers, etc. Complete kit consists of: 1 qty. Clutch disc 1 qty. Pressure plate 1 qty. Release bearing 1 qty. Spline lubricant kit weighs 31 lbs. (13.7 kg) please note: this kit is for the 930 4 speed transmission 78-88 "tall" deep profile bell housing only. Tech tip: do you have a sloppy feeling when shifting? It's a great idea to add a shift coupler repair kit to your order, our part # 150pb00741. It will make your shifts crisp and clean again.
This item may need to be sourced...(choose a part on the right to read more)
View/Change Diagram
From $868.82
Make a selection
The Bosch professional preferred remanufactured starters are built especially for extremes of heat, cold and high demand. Each unit is remanufactured (not rebuilt). the highest quality materials and the most technologically advanced processes are used to ensure premium performance.
Oe-equivalent and direct fit application.
100% exhaustive multipoint quality and performance testing.
100% replacement of all bearings/bushings with high quality new friction reducing components.
Armature/commutator re-machined to the toughest concentricity standards in the industry.
Solenoids include 100% new high temp caps, contacts, copper windings and terminal hardware.
Every component is 100% factory tested prior to and...(choose a part on the right to read more)
View/Change Diagram
From $232.84
Make a selection
When working on your cylinder head, we recommend replacing the valves, valve seat rings, guides, springs, retainers and temperature sensor at the same time to reduce future labor costs. Cost effective, German made exhaust valve for the 964 c2 / c4 and rs that have the m64.01/02/03 motors. Sold individually. 6 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Eliminate your clutches slipping and chattering with this genuine kit. We only recommend this kit for non-modified cars that are not running any aftermarket upgrades like exhaust, chip tuning or larger displacements, etc. Complete kit consists of: 1 qty. Clutch disc 1 qty. Pressure plate 1 qty. Release bearing 1 qty. Spline lubricant kit weighs 14.1 lbs. (6.4 kg) tech tip: when you are planning to install a new clutch, it is a good idea to replace the clutch release fork and shaft to ensure proper clutch engagement. Our part # FVD116999 we also recommend a new guide tube 95011681306 for proper installation.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cann...(choose a part on the right to read more)
View/Change Diagram
From $768.04
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech new hi-flow headers provides a louder, deeper tone, improved throttle response and increase hp. Built with high quality t304 stainless steel polished finish. High quality welds, low restriction design combining to create an exceptional sound. Take your Boxster to the next level with the speedtech complete Boxster hi-flow exhaust system.
Lifetime warranty of manufacturing defects for original owner.
Specificatio...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$1,613.25
Make a selection
Exhaust valve for 993 models from 1994-1995 with m64.05/06/07/08 motors. 8 mm stem, 42.5 mm, weighs .22 lbs. (.1 kg). Sold individually. 6 necessary per car. When working on your cylinder head, we recommend replacing the valves, valve seat rings, guides, springs, retainers and temperature sensor at the same time to reduce future labor costs.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Brombacher racing exhaust system for 997gt3/rs
Facts:
- + 25 crank hp & + 25 crank torque
- 200 cell hdl German hjs sport catalysts
- 2 3/4" tubing (70 mm) straight through design for max. Power
- equal length header set up with merge collector for maximum torque gain
- weighs 42 lbs. (19 kg)
- 44.5 lb (20 kg) saving?s over stock system!
- t 316 stainless steel for improved durability over t 304
- reuse?s factory center muffler for backpressure and resonance dampening.
- includes all necessary clamps and mounting brakets
- made in Germany
- 106 db
- intoxicating growl at idle, partial throttle and wide open throttle
- reuse?s factory tips or larger aftermarket tips
- dme programming not ne...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
From $4,665.10
Make a selection
Beautiful chrome-plated exhaust tail pipe tips made of stainless steel and featuring a larger, oval cross section for a more powerful appearance. Also fits the sport exhaust system for the final finishing touch. Priced per each.
- + 15 crank hp & + 14 crank torque.
- 2 ½? (63.5 mm) diameter tubing (reduces thermal stress).
- 27 lbs. (12 kg) weight savings.
- reuses OEM headers and cats (no cel, retains OEM software).
- intoxicating growl at idle, partial throttle and wide open throttle.
- no ecu software programming necessary.
- includes dual ?black edition? 3.5? Ceramic-coated tips.
- made in Germany.
In our relentless quest to meet all of our customers exhaust needs; we wanted to create a special "black edition" system that retains the OEM headers and cats. The benefits are 3 fold, you can pass emissions with ease, you don?t need to run a software file (for those who are concerned about warranty) and you have a beauti...(choose a part on the right to read more)
General Fitment BOXSTER 2009-11
$2,750.70
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech new exhaust system for the Porsche 997s provides a louder, deeper tone, improved throttle response and increased hp, as compared to the OEM Porsche exhaust. Engineer built with high quality t304 stainless steel finished with a polished look. Fitment of the speedtech exhaust system is perfectly fit along with the OEM tips. High quality welds, low restriction design combining to create an exceptional sounding.
Lifetime war...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,613.25
Make a selection
This kit consists of all the proper hardware to install heat exchangers and a muffler, including the rare copper locking nuts to ensure a perfect installation. Remember to install the exchangers one at a time and torque in an x pattern to 18 ft lbs.
Note: before ordering any 914 exhaust component, make sure you check the style of heat exchangers to determine the correct system for your car. Since all four cylinder exchangers/mufflers fit all 914s, you may not have the same muffler and components originally fitted to your car. It is advised to match an exhaust system and gasket kit to the style of heat exchangers and not the year of car or engine.
- 1970-73 1.7/1.8l models have heat exchangers that turn up...(choose a part on the right to read more)
General Fitment 914 1970-76
The bbi autosport Porsche 991 GT3 exhaust center section is a direct replacement for the secondary center muffler. For those who desire a slightly milder exhaust tune, this piece is a great alternative to our cup-style side muffler bypass pipes. By retaining stock side mufflers and valves, the factory "sports button" feature is kept to conveniently switch back and forth between the aggressive "sport" mode during spirited driving sessions and the quieter, more civil "non-sport" mode for minimal noise on the highway.
Features
• delivers deep aggressive exhaust sound
• internal crossover bypass design
• significant weight reduction
• retains sports exhaust button function
• tig welded t3...(choose a part on the right to read more)
$2,100.00
Make a selection
This muffler was specifically designed for a backdate to the st look. It is manufactured for mid-range and top end performance, all without drone inside the cabin. It seamlessly mates to ssi heat exchangers for added performance while keeping the cabin warm in the winter. The muffler is vastly different than the common baffle plated mufflers stuffed with packing material that are common in the aftermarket. Ours are uniquely made with double perforated sound absorption tubes based on the halbgegenstromprinzip (half counter current principle). The acoustic silencer absorption tubes are made in a trapezoidal pattern and are perforated with varying diameters, which isolate and dampen the unwanted frequencies that c...(choose a part on the right to read more)
$2,014.10
Make a selection
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, all of our exhaust systems meet the standards of the German independent testing agency tÜv; whose quality standards are among some of the strictest in the world.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result...(choose a part on the right to read more)
General Fitment 911 1970-73
$5,357.49
Make a selection
FVD "brombacher" secondary catalytic bypass for Cayenne GTS 2008-
- + 10 crank hp & + 9 crank torque gain
- 2 ½" (63.5 mm) diameter tubing (reduces thermal stress)
- 25 lbs. Weight savings
- t 316 stainless steel for improved durability over t 304
- includes factory style hangers
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no check engine light
For an even more aggressive growl purchase an FVD "brombacher" sport muffler!
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of ou...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
$1,430.00
Make a selection
Brombacher sound version sport muffler for 957 Cayenne GTS (08-)
Facts:
- + 8 crank hp & + 7 crank torque gain
- 2 ½? (63.5 mm) diameter tubing (reduces thermal stress)
- 8 lbs. Weight savings over stock
- t 316 stainless steel for improved durability over t 304
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no check engine light
***note: Cayenne GTS's with valved Porsche exhaust must purchase additional tips! Either bes 957 260 01s or 955 111 251 71 & 955 111 252 71.
Non valved GTS OEM mufflers do not require additional tips.
For an even more aggressive growl purchase an FVD Brombachersecondary bypass pipes!
FVD is proud to introduce our n...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
From $3,356.10
Make a selection
Brombacher 957 Cayenne® turbo ?sound version? Sport muffler with valves.
- + 25 crank hp & + 19 crank torque*
- 2.5" tubing (63.5mm) straight through design for max. Power
- weighs 30 lbs. (14,0 kg)
- t 316 stainless steel for improved durability over t 304
- deeper tonal quality which enhances 4.8 l turbo Porsche® sound.*
- no ecu (software) programming necessary.
- will work with OEM exhaust components.
- absolutely no drone in the cabin.
- exhaust tips are not included. Stock tips will fit or FVD quad 4'' (100mm) round tips are sold separately.
- does not interfere with emissions and will not trigger the check engine light.
- made in Germany.
* in conjunction with secondary bypass pipe...(choose a part on the right to read more)
General Fitment CAYENNE 2007-10
From $3,457.30
Make a selection
Brombacher 958 Cayenne® turbo ?sound version? Sport muffler with tips.
- + 25 crank hp & + 19 crank torque*
- 2.5" tubing (63.5mm) straight through design for max. Power
- weighs 30 lbs. (14,0 kg)
- t 316 stainless steel for improved durability over t 304
- deeper tonal quality which enhances 4.8 l turbo Porsche® sound.*
- no ecu (software) programming necessary.
- will work with OEM exhaust components.
- absolutely no drone in the cabin.
- exhaust tips are included.
- does not interfere with emissions and will not trigger the check engine light.
- made in Germany.
* in conjunction with secondary bypass pipes. A sport muffler on a 958 Cayenne® turbo will only change the tonal quality not t...(choose a part on the right to read more)
General Fitment CAYENNE 2011-14
From $3,191.10
Make a selection
"brombacher" 987/s (sound version) stainless steel exhaust system
Facts:
- + 20 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2" tubing (50 mm) straight through design for max. Power
- weighs 57 lbs. (25,8 kg)
- t 316 stainless steel for improved durability over t 304
- dual 3.5"(90mm) round tips
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts a...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$7,617.50
Make a selection
FVD "brombacher" titan sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 100 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 42 lbs. (19,3 kg)
- material: titan
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche® sound. In addition, bromb...(choose a part on the right to read more)
General Fitment 911 1989-94
From $21,479.70
Make a selection
"brombacher" catalytic bypass pipe for 964 89-94
- + 15 crank hp & + 13 crank torque
- 2 3/4" tubing (70 mm) straight through design for max. Power
- weighs 3.3 lbs. (1,5 kg)
- t 316 stainless steel for improved durability over t 304
- made in Germany
- dme programming necessary.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resis...(choose a part on the right to read more)
General Fitment 911 1987-89
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)
General Fitment 911 1989-94
$8,518.40
Make a selection
Brombacher panamera® s & 4s primary sport muffler
- 5 crank hp & + 4 crank torque.
- 2.5" tubing (63.5mm) straight through design for maximum power*.
- t 316 stainless steel for improved durability over t 304.
- deeper tonal quality and louder volume which enhances 4.8 l Porsche® sound.**
- no ecu (software) programming necessary.
- will work with OEM exhaust components.
- does not interfere with emissions and will not trigger the check engine light.
- made in Germany.
- can be used in conjunction with our 200 cell sport cats and / or our sport muffler and our tips for more power and sound.
* we decided on a straight pipe design as we found that ?x pipe? Designs robbed the panamera® s & 4s o...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
$3,100.67
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|